Upgrade the induction system on your 1.4L Multi Air Turbo FIAT 500 with the MAXFlow Intake/ Engine Cover/ Turbo Thermal Blanket Pack.

This listing includes:
 
MAXFlow Intake System by BMC / MADNESS
SILA Concepts Thermal Blanket
Scorpion Design Engine Cover 
Breather Filter

The MAXFlow Intake System by BMC / MADNESS is a completely sealed Intake that has been designed for your North American 1.4L Multi Air Turbocharged FIAT 500. This intake has been designed by a partnership of two companies (BMC Air Filters Italy and MADNESS). When designing this intake we partnered with the top air filter manufacturer in the world. Click Here to visit the product listing for more information on the MAXFlow Intake System by BMC / MADNESS.

The SILA Concepts Thermal Blanket is designed to keep more heat inside the turbine housing improving the performance and increase the overall boost pressure while at the same time decrease the time it takes to build pressure. Click Here to visit the product listing for more information on the SILA Concepts Thermal Blanket.

This kit also include our precision cut Black Powder Coated Aluminum Scorpion Design Engine Cover designed to work perfectly with the MAXFlow Intake System, and an additional Breather Filter.
 

CARB Information:

In the interest of improved air quality, the California Air Resources Board (CARB) requires new vehicle and manufacturers of aftermarket parts to develop engine and emissions equipment that either reduce or maintain specific air pollutants affected by vehicle use. Both the California Vehicle Code (section 27156) and Federal Clean Air Act (administered by the Environmental Protection Agency) prohibit modifications that increase vehicle emissions.

Aftermarket parts manufacturers, particularly in the high-performance segment, are required to obtain CARB approval in the form of Executive Orders (E.O.s) for any product not qualifying as a direct replacement for an
original equipment part. This includes meeting all E.O. requirements in its product development process. This guarantees that users of this product will meet certification requirements when registering, selling, or needing to
pass various emissions tests or Inspection and Maintenance (I&M) programs administered by state or local enforcement agencies.

Make sure that any emissions-related product you buy and install carries an E.O. number or is pending an E.O. Without this verification you are at risk, in potential violation of regulations and may incur unnecessary financial obligations during vehicle inspections or emissions tests



Special Note for California Customers:

This part is not CARB Certified (California Air Resource Board) at this time and is not legal for use in California on pollution controlled vehicles.

If you are located in California please note that we have other options available that comply with the California Vehicle Code. Please contact us directly by phone, email or check our site for details.

Upon installation, the thermal coating and material within the blanket will undergo a curing process as they reach the designated operating temperature. It is a standard occurrence for the blanket to emit smoke during this period.

Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov