As Low as with Affirm.
Please make sure this item fits your vehicle.In order to reduce errors in orders, please make sure the product you are ordering fits your vehicle model.
Looking to give your FIAT 500 a power boost?
This is a good, affordable solution for your 500.
This Short Ram Intake is designed for the North American Model FIAT 500 (will not fit the ABARTH/ 500T Models).
There are several brands out there when it comes to aftermarket air intake systems for your FIAT 500, but Injen leads the way in innovation, efficiency, and power gains. Injen Cold Air Intake Systems are more than just a high flow air filter on a less restrictive tube. Featuring Injen's patented MR Technology, Injen incorporates a step process into their intake tubes (meaning they increase or decrease the diameter of the intake tube at strategic points to control airflow). This, coupled with the fact that Injen Injen Air Intakes incorporate your existing sensors, mean you won't have any check engine lights and it is safe for use on your FIAT 500. This "Factory Tuned" design means you won't need any tuning and makes this truly a bolt on system.
At the end of the Injen Intake is the Injen High Flow Air Filter Element, which is relocated in the front of the engine, not behind. This strategic placement allows you to obtain colder air while still having the air filter protected from the elements. The Injen air filter that can be cleaned and reused for as long as you own your 500. An incorporated velocity stack smooths out airflow to help maximize power gains. Comprehensive installation instructions including photos make installation of your new Injen Intake easy enough to do yourself with basic hand tools in a couple of hours or less. Everything you need to install this air intake is included.
The manufacturer (Injen) states that their Cold Air Intake System for the FIAT 500 exceeds OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you'll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.
Injen's SP Series Cold Air Intake is custom-designed for a precise fit on your FIAT 500
Specifically built for radical top-end power gains
Specially engineered to gather fresher, denser, colder air that provides you with the highest increase in power
Your SP Series Cold Air Intake unleashes your engine's power potential by force-feeding rich oxygen into your cylinders, which improves combustion efficiency
Wrought from premium slabs of aerospace-grade T-6061 billet aluminum—famous for its high strength, light weight and excellent corrosion resistance
For unrestricted air flow, the SP Series Cold Air Intake is CNC mandrel bent
This SP Series FIAT 500 Cold Air Intake includes a reusable, high-performance cotton-gauze air filter
Dyno-proven for maximum, reliable horsepower gains
Comes with stainless steel clamps, silicone hoses and detailed instructions for a simple at-home installation
Injen's groundbreaking rubber "vibra-mount" system cushions against engine torque
Choose your finish: polished or black - This listing is for the Black Finish Version
Made with pride in the USA
Your SP Series Cold Air Intake's intake tube and air filter are covered by a Lifetime Warranty (details below)
Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.
In the interest of improved air quality, the California Air Resources Board (CARB) requires new vehicle and manufacturers of aftermarket parts to develop engine and emissions equipment that either reduce or maintain specific air pollutants affected by vehicle use. Both the California Vehicle Code (section 27156) and Federal Clean Air Act (administered by the Environmental Protection Agency) prohibit modifications that increase vehicle emissions.
Aftermarket parts manufacturers, particularly in the high-performance segment, are required to obtain CARB approval in the form of Executive Orders (E.O.s) for any product not qualifying as a direct replacement for an
original equipment part. This includes meeting all E.O. requirements in its product development process. This guarantees that users of this product will meet certification requirements when registering, selling, or needing to
pass various emissions tests or Inspection and Maintenance (I&M) programs administered by state or local enforcement agencies.
Make sure that any emissions-related product you buy and install carries an E.O. number or is pending an E.O. Without this verification you are at risk, in potential violation of regulations and may incur unnecessary financial obligations during vehicle inspections or emissions tests
Special Note for California Customers:
This part is not CARB Certified (California Air Resource Board) at this time and is not legal for use in California on pollution controlled vehicles.
If you are located in California please note that we have other options available that comply with the California Vehicle Code. Please contact us directly by phone, email or check our site for details.
Any California orders will be held for review if they contain this part. We will then contact you directly with options.
INJEN TECHNOLOGY - A DECADE OF INNOVATION
For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway. Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.
What most people do not know is that Injen's sister company, RD Metal Works established in 1981, was actually designing and manufacturing air intake kits for leading air filter and intake manufacturers since the mid 1990's. Absorbing the experience, design capabilities and quality standards of RD Metal Works, Injen Technology was formed. In 1998, we embarked on a never-ending quest to brand our own name and set new standards of quality and performance while
constantly striving to improve our own engineering capabilities. Bringing together all phases of manufacturing under
one roof proved to be the equation for unrivaled success.
Injen Technology has made it a point to stay at the forefront of performance technology making only the best air intake one can envision. In 1999 Injen was faced with such a strong demand in both US and Canada that in order to meet production schedules it became essential to branch out and add a second building.
In 2003, Injen Technology launched our Super SES stainless steel cat-back exhaust systems complimenting our line of air intake systems. Each exhaust system was equipped with the Injen signature style slanted mufflers and featured highly polished stainless steel.
In the fall of 2005, Injen Technology announced the arrival of The SP Air Intake System. The SP series was equipped with MR Technology launching the “World's First Tuned” air intake systems. In the winter of 2005, “Power Flow” was introduced with MR Technology and an all new Power Box. This was another leap forward for Injen Technology, launching the company into the largest of the automotive market segments; Truck, SUV and High Performance Automotive. The new product line was displayed for the first time at the 2005 SEMA show and won the International Product Award. The Power Flow series has received rave reviews from both existing customers plus our newly targeted market of jobbers and warehouse distributors.
April 2008, Injen launched the companies latest product line; the Diesel Power-Flow . Once again Injen set new industry standards by incorporating the first Power-On-Demand air intake system with Vi Technology and with a removable stainless steel Pre-Filter. In conjunction with the launch of the diesel line, Injen also announced the Co/Branding partnership with AMSOIL, Inc. Injen and AMSOIL teamed up to incorporate an Injen/AMSOIL High Performance dry media into the new Power-Flow diesel air intake applications and the Power-Flow gas models. Both Injen and AMSOIL will market the Power-Flow series of air intake systems. As in the past, Injen continues to set the industry bench mark for innovation, styling and technology.
With such an enthusiastic response for our new products we anticipate solid sales growth within all market segments. Our innovative designs, high performance standards and quality workmanship will pave the path for our continued success for years to come. At Injen Technology we are committed to “World Class Customer Service”.