Is your FIAT 500 outfitted with the newer European Style LED Tail Lights?

If the answer is yes, then these are for you.

This tail light cover kit is designed to add some extra details to the rear end of your FIAT 500 and make those LED Tail Lights really stand out!

Features:

• Designed for the FIAT 500
• Imported from Europe
  
• Fits the newer LED Style Tail Lights
• Will not fit the older non LED Style Tail Lights
• Epoxy in place
• Set of 2
• Carbon Fiber Finish
  

Installation:

These trim pieces are designed to be epoxied to the center area of the tail lights. Simply apply a 2 part epoxy to the edges of these trim pieces and insert them in to the center indented area in the factory tail lights. Tape them in place overnight to give the epoxy time to set. Remove the tape and you are done!

We recommend using Blue Painters Tape that can be found in most hardware stores. It comes off easy without leaving residue. Most 2 part epoxies will work. Check with your local hardware store to make sure it is designed to be used on plastic surfaces. Do not use products like JB Weld.

As always if you have a question give us a call! We will be glad to assist.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov