Available Options

FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red
FIAT 124 Spider MAXFlow Intake System - Red

FIAT 124 Spider MAXFlow Intake System - Red

Product Information
 price
$349.99
$399.99 Save: $50.00

Lowest Price Guaranteed
Average Rating
Brand:
Model:
124 Spider

Drive now, Pay later!

A completely sealed Intake that has been designed specifically for your FIAT 124 Spider.

This intake has been designed by a partnership of two companies (BMC Air Filters Italy and MADNESS). When designing this intake we partnered with the top air filter manufacturer in the world. BMC Air Filters Italy worked directly with us to help in designing a true, ready to bolt in, FIAT 124 specific intake that would utilize their top of the line BMC ITA Filtering System.  The BMC ITA Filtering System is used on many high power exotic cars all over the world. This intake system was built around this BMC filter.

The goal was to design and manufacture an intake system that would utilize top quality parts and provide owners with a sealed system that would provide the best combination of filtration and flow. After months of prototypes and testing the unit was released to great reviews from FIAT owners all over North America.

No fancy graphs, no inflated dyno numbers, just a solid, well built intake system that is properly designed and manufactured using top grade parts!

This system is not plagued by some of the issues that other systems on the market have, like rubbing on the hood or airbag sensors. This is due to the solid mount we have created for the intake. Our intake also uses even piping diameter throughout the whole system resulting in less air turbulence. 


The BMC OTA filtering system is composed of a oval carbon air box containing a washable air filtering element. Substituting the original air box with the BMC OTA, cold air is directly channeled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The OTA system uses a combination of high performance silicone couplers and aluminum piping for a direct bolt in fit.

 

This kit comes with everything you will need to make the conversion. Here is what is included in the kit:

  • BMC Carbon Canister with the OTA Filtering System
  • High Performance Silicone Connectors
  • Aluminum Tubing powder coated Red for a durable and long lasting finish
  • Tubing TIG Welded for a show quality finish
  • Crankcase Vent Filter included
  • BMC Cannister Filter Manufactured in Italy
  • All mounting hardware
  • Fits ABARTH and Non-ABARTH Models
  • BMC Filter Cleaning Kit - optional



Time to clean your BMC Filter?:

Purchase the Genuine BMC Cleaning Kit at the check our screen to be sure you have everything you need for the next service. No need to ever replace the filter module again. Simply clean it using the optional BMC Cleaning Kit (available at a discount cost at the check out screen).

 

More information on the BMC Carbon Canister Filter:

  • 5 Layers of Carbon Fiber for high thermal insulation from engine heat
  • Air filter with regenerate material which warrants a high filtration efficiency with reduced drops.
  • Oval Trumpet: sophisticated and designed inner system for the channeling, conveyance and increase of the air flow by introducing an innovative system/air conveyor named Trumpet.
  • The Trumpet, placed inside the OTA device on the air outlet side, enables to additionally increase the quantity of air to the engine by taking advantage from the dynamic conveyance given by its peculiar shape.
  • Air box with a sealing system enabling the best sealing among the components

Usually the original car airboxes work in such a condition as the air is recalled by the engine in a "depression regime", through reduced section tubes, thus resulting in high load drop along the aspiration line. The OTA device with its dynamic inlet works in a "pressure regime", therefore it provides a constant and high rated quantity of air to the engine taking advantage of the dynamic effect of the air pressure.

In addition to its oval shape, offering high installation versatility, OTA system introduces in its inner part technical solutions which optimize the fluid dynamic of the air to the engine. In particular, the innovative element called "TRUMPET", which is situated inside the air box in the area close to the air outlet, thanks to its shape, favors and optimizes the convey of the air flow to the engine, resulting in the diminishing of turbulence. This solution reduces the pressure drop along the engine aspiration line and, at the same time, takes advantage of the potentiality of the dynamic pressure of the air caused by the speed of the moving car.

The air filter inside the air box 1 is made of a multi layer pre-oiled filtering material which grants an high filtration efficiency against limited pressure drop in the air. The air filter has the function of protecting the engine from all the elements (debris, sand, dust, etc…) in the air flow to the engine during the aspiration phase. BMC air filter has a very low drop (i.e. the pressure difference between the air flow at the engine side and the one at the air entrance side) in order to enable the maximum air flow.

BMC air filter can be regenerated and re-used. Once the saturation level has been reached, it is possible to regenerate the filter by washing and re-oil operation performed by means of the relevant regeneration kit (included in this kit).



Please note!

CARB Information:

This product has just passed the needed tests for CARB Certifications with the SEMA Testing Lab. All test information has been submitted to CARB for final approval. While we cannot guarantee when and if this intake will be approved by CARB we can state that it passed all emission tests and has been submitted to CARB for approval. Once final approval is given we will update this listing and remove the California Contingency.


In the interest of improved air quality, the California Air Resources Board (CARB) requires new vehicle and manufacturers of aftermarket parts to develop engine and emissions equipment that either reduce or maintain specific air pollutants affected by vehicle use. Both the California Vehicle Code (section 27156) and Federal Clean Air Act (administered by the Environmental Protection Agency) prohibit modifications that increase vehicle emissions.

Aftermarket parts manufacturers, particularly in the high-performance segment, are required to obtain CARB approval in the form of Executive Orders (E.O.s) for any product not qualifying as a direct replacement for an
original equipment part. This includes meeting all E.O. requirements in its product development process. This guarantees that users of this product will meet certification requirements when registering, selling, or needing to
pass various emissions tests or Inspection and Maintenance (I&M) programs administered by state or local enforcement agencies.

Make sure that any emissions-related product you buy and install carries an E.O. number or is pending an E.O. Without this verification you are at risk, in potential violation of regulations and may incur unnecessary financial obligations during vehicle inspections or emissions tests

Special Note for California Customers:

This part is not CARB Certified (California Air Resource Board) at this time and is not legal for use in California on pollution controlled vehicles.

If you are located in California please note that we have other options available that comply with the California Vehicle Code. Please contact us directly by phone, email or check our site for details.

About Manufacturer

MADNESS Autoworks is your One Stop Shop for customizing, accessorizing and servicing your favorite ride.

After spending over a decade customizing countless vehicles and working with many local and international suppliers we have been fortunate to be able to offer a very large inventory of products to our fellow enthusiasts. However, at times we have found that what was available was not good enough or perhaps other options were also needed. When this happens we either design and manufacture the product ourselves or tap one of our manufacturing partners and ask them to assist and make a product to our specs.

Over the years that we have been in business we have formed a number of partnerships with our most trusted manufacturing partners and suppliers to help us produce products that we felt were needed and not available. At times we have also invested in infrastructure, manufacturing equipment and have recruiting some of the best talent that could help us design and build superior products and make them available to our fellow drivers.
 

Our goal at MADNESS is to provide top quality products that has been tested and used in our own vehicles and have proven to last and provide a good value for the investment. We do not design and build our products to be the cheapest, we design then to be the best value for the money and stand behind them the same way we stand behind our work.
 

Product Reviews

Average user rating

5 / 5

2 reviews

5
4
3
2
1

Two locations to serve you

AUSTIN, TX

22108 SH 71 W.
Spicewood, TX 78669
512-982-9393
Mon-Fri: 9 AM - 6PM CST
Sat-Sun: Closed

LOS ANGELES, CA

2716 Dawson Ave.
Signal Hill, CA 90755
562-981-6800
Mon-Fri: 9 AM - 6PM PST
Sat-Sun: Closed