Looking to give your FIAT 500L a power boost?
Manufacturer claims a gain of 7HP!
This intake is designed for the FIAT 500L with the Turbo 1.4L Motor (standard on the North American Model and optional on the EU Model). This unit will not fit any other model besides the 500L.
Injen leads the way in innovation, efficiency, and power gains. Injen Cold Air Intake Systems are more than just a high flow air filter on a less restrictive tube. Featuring Injen's patented MR Technology, Injen incorporates a step process into their intake tubes (meaning they increase or decrease the diameter of the intake tube at strategic points to control airflow). This, coupled with the fact that Injen Injen Air Intakes incorporate your existing sensors, mean you won't have any check engine lights and it is safe for use on your FIAT 500L. This "Factory Tuned" design means you won't need any tuning and makes this truly a bolt on system.
At the end of the Injen Intake is the Injen High Flow Air Filter Element, which is relocated in the front of the engine, not behind. This strategic placement allows you to obtain colder air while still having the air filter protected from the elements. The Injen air filter that can be cleaned and reused for as long as you own your 500L. An incorporated velocity stack smooths out airflow to help maximize power gains. Comprehensive installation instructions including photos make installation of your new Injen Intake easy enough to do yourself with basic hand tools in a couple of hours or less. Everything you need to install this air intake is included.
The manufacturer (Injen) states that their Cold Air Intake System for the FIAT 500L exceeds OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you'll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.
Injen's SP Series Cold Air Intake is custom-designed for a precise fit on your FIAT 500L
Specifically built for radical top-end power gains
Specially engineered to gather fresher, denser, colder air that provides you with the highest increase in power
Your SP Series Cold Air Intake unleashes your engine's power potential by force-feeding rich oxygen into your cylinders, which improves combustion efficiency
Wrought from premium slabs of aerospace-grade T-6061 billet aluminum—famous for its high strength, light weight and excellent corrosion resistance
For unrestricted air flow, the SP Series Cold Air Intake is CNC mandrel bent
This SP Series FIAT 500L Cold Air Intake includes a reusable, high-performance cotton-gauze air filter
Dyno-proven for maximum, reliable horsepower gains
Comes with stainless steel clamps, silicone hoses and detailed instructions for a simple at-home installation
Injen's groundbreaking rubber "vibra-mount" system cushions against engine torque
Choose your finish: polished or black - This listing is for the Polished Version
Made with pride in the USA
Your SP Series Cold Air Intake's intake tube and air filter are covered by a Lifetime Warranty (details below)
This intake is designed for the pre 2015 model of the FIAT 500L. If you have a 2015 model the intake will fit, but you will need to fabricate an additional part (not included or available at this time) to allow for the use of a new sensor.
Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.
This is a Close Out Item. All Sales Final!
In the interest of improved air quality, the California Air Resources Board (CARB) requires new vehicle and manufacturers of aftermarket parts to develop engine and emissions equipment that either reduce or maintain specific air pollutants affected by vehicle use. Both the California Vehicle Code (section 27156) and Federal Clean Air Act (administered by the Environmental Protection Agency) prohibit modifications that increase vehicle emissions.
Aftermarket parts manufacturers, particularly in the high-performance segment, are required to obtain CARB approval in the form of Executive Orders (E.O.s) for any product not qualifying as a direct replacement for an
original equipment part. This includes meeting all E.O. requirements in its product development process. This guarantees that users of this product will meet certification requirements when registering, selling, or needing to
pass various emissions tests or Inspection and Maintenance (I&M) programs administered by state or local enforcement agencies.
Make sure that any emissions-related product you buy and install carries an E.O. number or is pending an E.O. Without this verification you are at risk, in potential violation of regulations and may incur unnecessary financial obligations during vehicle inspections or emissions tests
Special Note for California Customers:
This part is not CARB Certified (California Air Resource Board) at this time and is not legal for use in California on pollution controlled vehicles.
If you are located in California please note that we have other options available that comply with the California Vehicle Code. Please contact us directly by phone, email or check our site for details.