Available Options

FIAT 500L Downpipe Thermal Blanket

FIAT 500L Downpipe Thermal Blanket

FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
FIAT 500L Downpipe Thermal Blanket
Product Information
 price
$229.99
$239.99 Save: $10.00

Lowest Price Guaranteed
Average Rating
Model:
500l
Drive now, Pay later with Affirm!
or with PayPal

Both options will be available upon checkout.

FIAT 500L Downpipe Thermal Blanket free shipping
Reduce the heat in the engine bay and boost the performance of your turbocharged FIAT 500L with this Down Pipe Thermal Blank.


Specifically designed for the FIAT 500L models that feature a 1.4L Turbo Multi Air Engine.

This blanket is designed to limit the amount of heat that is transferred from your factory down pipe/ catalytic converter to your engine bay. By limiting the amount of transferred heat you extend the life of the components under the hood and also improve response from your car.

These thermal blankets are designed to improve response while lowering under hood temperatures. Thermal losses from headers, turbo housings and downpipes cool exhaust temperatures. The result of cooler exhaust temperatures is a loss of energy and velocity. The cooling effect reduces turbo response and  costs horsepower. This Thermal Blanket is designed to help insulate the down pipe from losing that critical heat. The benefit of this is that the exhaust gases maintain their velocity. This helps improve power and at the same time protects vital components under the hood from heat damage.

For even more benefit and heat management check out our turbo blankets.

  Down Pipe Thermal Blanket Materials:
-Silicone Impregnated Fiberglass Outer Shell
-Calcium Magnesium Silicate Wool Inner Core (secured with Stainless Steel Wire Mesh)
-Stainless Steel Fasteners
-Stainless Steel Wire Included

Down Pipe Thermal Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2300 Deg F / 1260 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C

Exterior Surface:
Direct Contact Limit: 1000 Deg F / 538 Deg C
Radiant Heat Limit: 1700 Deg F / 927 Deg C



During the first few heat cycles, the thermal coating and material within the blanket will go through a curing process as they reach their operational temperature. It is completely normal for the blanket to emit some smoke during this time and leave a powdery residue. After a few cycles, the smoke will subside; simply wipe off any residue that may accumulate nearby. Please note that the blanket will lose some flexibility after the first few heat cycles as the material cures, so it should not be routinely removed once fitted to avoid damage.


If you have any questions about this product, feel free to reach out to us! Call us at 512-982-9393 (Texas) or 562-981-6800 (California), and our team will be happy to help.











CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Reviews

Average user rating

5 / 5

4 reviews

5
4
3
2
1

Jeff Romeo

Very nice fit and high quality. Removal of the down pipe is a pain on these vehicles though, expect the removal and install to take you a few hours.
02/19/2018 |

ripper

The install is pretty easy (finger buster, but straight forward). I installed the turbo blanket over the existing heat shield. Very good fit and alignment with the stock bolts. Did not have to remove the air intake or the hood latch, but I have small hands and arms.
07/28/2013 |

Adam T.

If you are going to do an intake, this is a must. You will immediately feel the heat difference once you pop your hood. The most important thing about a turbo car is "cooler" air temps, this is a great start for adding efficiency.

The install is pretty easy, you will need to take off the hood latch in
order to reach the hardest bolt.

I give this an A+
07/06/2013 |

Nicholas Ocampo

Great if you want to get rid of the hot engine temps.... Before I had to suit up with oven mits and a face shield to not get that rush of hot air and hood temps... After install ( finger buster , but easy) the temps were much lower and very noticeable . Maybe a hood scoop and vents would further aid in this also.. Love the blanket :) thanx 500madness
06/14/2013 |

Two locations to serve you

AUSTIN, TX

22108 SH 71 W.
Spicewood, TX 78669
512-982-9393
Mon-Fri: 9 AM - 6PM CST
Sat-Sun: Closed

LOS ANGELES, CA

2716 Dawson Ave.
Signal Hill, CA 90755
562-981-6800
Mon-Fri: 9 AM - 6PM PST
Sat-Sun: Closed